Hydraulic Hose & Connection Solutions
From textile to PTFE hoses, fittings, adapters, quick couplings, valves, and tube bending. Choose the right type for your pressure, temperature, and media.
Hoses, fittings, adapters, couplings, valves, guards, and tube bending available from a single source.
Products conform to EN, SAE, and ISO standards commonly used in hydraulic industries.
Hose assemblies made to your required length and fittings, tested before delivery.
Hydraulic Hoses, Fittings, Quick Couplings & Accessories for Industry
Complete hydraulic fluid line components: textile braid, wire braid, wire spiral, thermoplastic, and PTFE hoses; fittings and adapters in various thread standards; quick couplings, swivel connectors, valves, hose guards, and custom-bent tubes.
One Source for Your Entire Hydraulic Line
Choose a category or search products. Click a card to view example products, general specifications, applications, and selection notes.
Hose Types At a Glance
Relative guide for comparing five hose types. More filled dots indicate stronger capability in that aspect.
| Hose Type | Pressure | Flexibility | Temperature | Chemical Resistance |
|---|---|---|---|---|
| Textile Braid Hose | ||||
| Wire Braid Hose | ||||
| Wire Spiral Hose | ||||
| Thermoplastic Hose | ||||
| PTFE Hose |
General guide. Actual capability depends on diameter, construction, and manufacturer specifications. Always refer to the product datasheet.
Custom Hose Assemblies
Send specifications or a sample of your old hose. We prepare assemblies with the right length, fittings, and angles.
- 1
Measure & Specify
Define hose type, diameter, length, fitting ends, and bend angles.
- 2
Cut & Clean
Precision cutting and internal cleaning of the hose before assembly.
- 3
Crimp to Spec
Fitting crimping follows crimp data for the hose and fitting combination.
- 4
Test & Label
Pressure testing, visual inspection, and labeling before delivery.
Reading Hose Codes
Hose codes contain construction, size, and standard information. Here is how to read them, plus size and connection tables.
- 2SNTwo layers of steel wire braid reinforcement
- DN12Nominal inside diameter 12 mm
- -8Dash size code: 8/16 inch = 1/2 inch
- EN 853Wire braid hydraulic hose standard
Hose Size Conversion
Inside diameter (DN), dash code, and inches
| DN (mm) | Dash | Inches |
|---|---|---|
| DN6 | -4 | 1/4" |
| DN8 | -5 | 5/16" |
| DN10 | -6 | 3/8" |
| DN12 | -8 | 1/2" |
| DN16 | -10 | 5/8" |
| DN19 | -12 | 3/4" |
| DN25 | -16 | 1" |
| DN31 | -20 | 1-1/4" |
| DN38 | -24 | 1-1/2" |
| DN51 | -32 | 2" |
Common Connection Types
Threads and sealing surfaces frequently encountered
| Type | Seal / Angle | Notes |
|---|---|---|
| BSP | 55° pipe thread | Common in Europe and Asia (BSPP / BSPT) |
| NPT | 60° tapered thread | American standard, seal on threads |
| JIC | 37° flare | Metal-to-metal seal, common on heavy equipment |
| ORFS | O-ring face seal | Leak-resistant, suitable for high pressure |
| Metric | 24° cone | European system, light and heavy duty |
| SAE Flange | O-ring + 4 bolts | Large diameter, Code 61 / 62 |
Threads that look similar may not be compatible. Match thread type, size, and sealing surface before installation.
Choose Right, Operate Safely
Hydraulic hose failures can almost always be prevented through correct selection and routine inspection.
Six Selection Factors
Size
Inside diameter determines flow rate. Too small causes heat and pressure loss.
Temperature
Consider fluid and ambient temperatures, including short-term spikes.
Application
Movement, vibration, installation space, and bend radius determine construction type.
Media
Ensure the inner tube is compatible with oil, water-glycol, chemicals, or fuel.
Pressure
Calculate working pressure plus impulses with an appropriate safety factor.
End Connections
Specify thread type, fitting angle, and compatibility with existing components.
Common Failure Causes
Excess Pressure & Impulse
Repeated pressure spikes fatigue the hose reinforcement until it eventually bursts.
Bending & Twisting
Bend radius below limits or a twisted hose accelerates damage.
Abrasion & Environment
Friction, heat, and chemical exposure damage the cover. Use guards and proper routing.
Wrong Fitting & Crimp
Incompatible fitting combinations or improper crimping cause fittings to blow off.
Fine high-pressure leaks can penetrate skin (fluid injection) and are dangerous. Never check for leaks by hand. Use cardboard or a board, wear PPE, and depressurize the system before removing hoses or fittings.
Reference Standards
Commonly referenced norms for hydraulic hoses, fittings, and connections.
Frequently Asked Questions
Determine working pressure (including impulses), inside diameter, temperature, media type, installation space, and end connection type. Then select the appropriate construction and standard. If unsure, send us specifications or a sample of your old hose.
1SN has one layer of steel wire braid, while 2SN has two. For the same diameter, 2SN generally has a higher working pressure.
Choose PTFE for high temperatures, aggressive chemicals, or cleanliness requirements such as in food and pharmaceutical industries. For general hydraulics on heavy equipment, wire braid or wire spiral is usually more suitable.
It is not recommended. Hose, fitting, and crimp data are specified by the manufacturer. Mixing components without official data can reduce safety and working pressure of the assembly.
There is no fixed lifespan as it depends heavily on pressure, temperature, movement, and environment. Perform regular inspections and replace if there are leaks, cover cracks, bulges, or visible reinforcement wires.
Yes. Send us the hose type, length, fitting types and angles, or a sample of the old assembly. We will prepare an assembly to those specifications.
Need a Specific Hose or Fitting?
Provide type, size, and quantity. If unsure, send a photo or sample of your old hose and we will help match it.